Plastidip Protective Spray Rubber, Matte Fluorescent Orange

Plasti dip spray can, 400ml, in Fluorescent Orange color.

It is essential that the base color, before spraying this fluorescent color (Blaze Range), is white.

In addition, we recommend taking great care with BLAZE colors, as they are not suitable for surfaces exposed to a lot of sunlight, given their low lightfastness.

This paint is used to coat objects and protect them from inclement weather (water), UV rays, etc.

Once dry, it remains flexible and completely odorless. It is waterproof.

Plasti Dip liquid rubber is a protective rubber coating that is very useful for sealing, cushioning, and framing. It is also used as an anti-slip product. It is especially recommended for indoor and outdoor use as it withstands extreme temperatures, from -34°C to 93°C. It is also resistant to acids, alkalis, salts, oils, and many other chemical agents.

It does not contain silicone and once dry, it can be easily removed.

Especially adherent to metals, wood, plastics, glass, fabrics, wool, stones, fiberglass or carbon fibers, etc. To increase its adhesion, you can use the primer product specially designed for Plasti Dip liquid rubber.

Instructions for use:
The surface to be protected must be dry, clean, and free of any substances that may hinder adhesion. Before opening the can and spraying the product, shake gently. Let it sit for a few minutes to avoid air bubbles.
We will need to apply several layers of paint, leaving a minimum recommended drying time of about 10 minutes between each layer.

Technical information:
Stable at temperatures between -34ºC and 93ºC.
Optimal application temperature, around 20ºC.
Minimum drying time to contact: approx. 5 min.
Complete drying time: 1 hour, depending on the thickness and number of layers applied.
The manufacturer recommends layers of 0.2mm thickness, which will require approximately 150g of product per m2.

Download the safety data sheet